Manual steel strapping tools with a seal joint
The tolls described here are designed for round objects and goods with small surfaces. An exception is the manual tensioner A301 used in combination with the manual sealer A412 and designed especially for large flat objects with a long band take-up.
The joint requires seal joints and thanks to the ideal lever configuration, these can be producted with minimal force. The average strenght of the double notch joint with seals is ca. 75%.
A332 - A333 - A335 - A337 - A338 - A431 - A301/A412 - A402/A412
A301/A412Manual tensioner A301 is specially designed for flat objects and packages. Thanks to the feed wheel tensioning system an unlimited band take-up is permitted, guaranteeing taut tension tension with no tension loss. Using manual sealer model A412 the double notch joint is produced in one operation. The ideally curved levers prevent the handle from jamming, guaranteeing rational working with no risk of hand injury. Strap qualities :Regular duty (Uniflex) Strap dimensions :19.0 - 32.0 x 0.50 - 1.00 mm Sealing type :Metal seals Weights:A301 : 3.5 kg / 7.7 lbs |
A402/A412Model A402 is especially well suited for round packages with a very small supporting surface. Here too an unlimited take-up is possible and the double notch joint is produced using the manual sealer A412. The ideally curved levers prevent the handle from jamming, guaranteeing rational working with no risk of hand injury. The rubber spacer on the lower lever also permits sealing with both hands on the upper lever. Strap qualities :Regular duty (Uniflex) Strap dimensions :19.0 - 32.0 x 0.63 - 1.00 mm Sealing type :Metal seals Weights :A402 : 4.0 kg / 8.8 lbs |
